The T-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3" Velcro pad makes for easy attachment of sanding disk. The 3/32" Orbit gives a fine finish for the most demanding work.
The T-7555/6VAC is a small, compact and easy to use. It features an adjustable exhaust, heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. The 3/16" orbit gives a fine finish and heavy cutting action for the most demanding work. The shroud has a vacuum hookup to pull dust away from the surface of your work.
The T-7665 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. Pad size is 90x90x80mm. Triangular Pad allows use in corners and tight spots. The 1/8" Orbit gives a fine finish and heavy cutting action for the most demanding work. It can be used for sanding, polishing and scrubbing.
T-7553 | T-7555VAC | T-7556VAC | T-7665 | |
---|---|---|---|---|
Free Speed RPM | 11,000 | 11,000 | 11,000 | 10,000 |
Pad Size | 3" | 5" | 6" | 90 X 90 X 80 mm |
Weight | 2.5 lbs. | 2.5 lbs. | 2.5 lbs. | 1.5 lbs. |
Height | 4" | 4" | 4" | 3 1/8" |
Orbit Diameter | 3/32" | 3/16" | 3/32" | 1/8" |
Spring Size | 5/16" - 24 | 5/16" - 24 | 5/16" - 24 | N/A |
Air Inlet | 90 PSI Max. | 90 PSI Max. | 90 PSI Max. | 90 PSI Max. |
Air Pressure | 1/4" NPT | 1/4" NPT | 1/4" NPT | 1/4" NPT |
All models come with vinyl faced PSA (pressure sensitive adhesive) pads.
T-7445 | T-7446 | |
---|---|---|
Free Speed RPM | 6,000 | 6,000 |
Pad Size | 5" | 5" |
Weight | 2.2 lbs. | 2.2 lbs. |
Air Pressure | 90 PSI Max. | 90 PSI Max. |
A great finishing sander. Smooth and quite, yet has a fast cutting action.
Free Speed RPM | 10,000 |
---|---|
Pad Size | 5" or 6" |
Weight | 2 lbs. |
Orbit Diameter | 3/16" or 3/32" |
Spring Size | 5/16 - 24 |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
OUR BEST DA SANDER - The T-9556 has an aluminum and steel rotor. Smooth, quite, low vibration, and great cutting action. Built for production.
Free Speed RPM | 10,000 |
---|---|
Pad Size | 6" |
Weight | 2.2 lbs. |
Orbit Diameter | 3/16" |
Spring Size | 5/16 - 24 |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
RPM | 8,000 |
---|---|
Pad Size | 2" |
Length | 5" |
Weight | 1.5 lbs. |
Hose Size | 3/8" |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
Small compact size makes this tool a must whenever a finish sander is needed for working in tight spots.
RPM | 18,000 |
---|---|
Pad Diameter | 2" |
Length | 6 1/2" |
Weight | 1.25 lbs. |
Air Pressure | 90 PSI Max. |
RPM | 10,000 |
---|---|
Pad Size | 5" - 6" |
Length | 8.5" |
Weight | 1.7 lbs. |
Hose Size | 3/8" |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
This lightweight, rugged 1.0 horsepower sander/polisher is excellent for producing a uniform surface finish without leaving shadows or transition lines. The perfect tool for cleaning welds, roughing, deburring, glazing, brushing, blending, graining, polishing and finishing.
RPM | 2500/4500 |
---|---|
Spindle | Size 1” keyed |
Length | 14” |
Weight | 6.35 lbs. |
Air Inlet | 1/4” NPT |
Air Pressure | 90 PSI Max. |
RPM | 10,000 |
---|---|
Pad Size | 5" - 6" |
Length | 8 3/4" |
Weight | 3 1/4 lbs. |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
Smooth, quiet and reliable, the T-7786 & T-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on you work.
RPM | 10,000 |
---|---|
Pad Size | 3 3/4" x 4 3/4" |
(110 x 100 mm) | |
Length | 5" |
Weight | 1.5 lbs. |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
Used for wet for dry sanding. Great for fiberglass, plastic, steel, aluminum, or wood. A must for every body shop and woodworking shop.
RPM | 14,000 |
---|---|
Length | 5" |
Weight | 1.5 lbs. |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
Used for wet for dry sanding. Great for fiberglass, plastic, steel, aluminum, or wood. A must for every body shop and woodworking shop.
Free Speed RPM | 14,000 |
---|---|
Weight | 2.3 lbs. |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
Horsepower | .5 |
RPM | 2,500 |
---|---|
Pad Size | 3" |
Horsepower | .3 |
Length | 5 1/2" |
Weight | 1.32 lbs. |
Spindle Third | 1/4 NPT |
Air Pressure | 90 PSI Max. |
Horsepower | .5 |
3-1/2" Polishing Pad for the T-7888P. For use with Tay.7888P50V Velcro Pad.
Both the T-7718 & T-7718P are available with a short muffler side handle. Add SM after the model #.
Same great tool as the T-7718 but with a lower gear ratio. RPM is 2,000, the perfect polishing speed. Comes complete with a rubber back up pad our T-7470A and the T-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wool.
T-7716W | T-7718 | T-7718P | |
---|---|---|---|
Pad Size | N/A | 7" | 7" |
RPM | 4,500 | 4,000 | 2,000 |
Spindle Size | 5/8" - 11 | 5/8" - 11 | 5/8" - 11 |
Length | 16" | 8 1/4" | 8 1/4" |
Weight | 4.62 lbs. | 5.25 lbs. | 5.25 lbs. |
Air Inlet | 1/4" NPT | 1/4" NPT | 1/4" NPT |
Air Pressure | 90 PSI Max. | 90 PSI Max. | 90 PSI Max. |
Backup pad included (our T-7470A)
This unique sander replicates the human finger in its orbital motion 4 "finger" pads.
RPM | 16,000 |
---|---|
Length | 7" |
Weight | 1.5 lbs. |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
Strokes per min. | 3,000 |
---|---|
Pad Size | 2 3/4" X 17 1/2" |
Weight | 6.25 lbs. |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
The T-7315 removes material form large areas with ease. The synchronized dual pistons give a smooth action that reduces operator fatigue
The T-7815A features heavy duty alloy steel gears, safety lock off lever, lightweight aluminum housing, built in regulator and convenient side handle. Rear exhaust.
RPM | 6,000 |
---|---|
Pad Size | 5" |
Horsepower | .8 |
Length | 9.7 |
Weight | 2.9 lbs. |
Air Pressure | 90 PSI Max. |
Spindle Size | 5/8"-11 |
Same great tool as the T-9916 but with a lower gear ratio. RPM is 2,500, the perfect polishing speed. Comes complete with a rubber backup pad (our T-7470A) and the T-7472 Wool Polishing Pad.
This Lightweight, rugged 1.3 horsepower sander is an excellent for shipping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with a rubber backup pad - T-7470A. Auxiliary Handle rotates for left or right handed use, or straight up!
T-9916P | T-9916 | |
---|---|---|
RPM | 2,500 | 4,500 |
Spindle Size | 5/8"-11 | 5/8"-11 |
Length | 16" | 16" |
Weight | 4 5/8" | 4 5/8" |
Air Inlet | 1/4" NPT | 1/4" NPT |
Air Pressure | 90 PSI Max. | 90 PSI Max. |
RPM | 900 |
---|---|
Pad Size | 8" |
Height | 4 5/8" |
Weight | 4.25" |
Air Pressure | 90 PSI Max. |
This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler and for heavy removal. Comes complete with a foam 7" Velcro Pad - T-881647V. Sanders comes with blue grip, polishers with red. Rear exhaust.
RPM | 5,500 |
---|---|
Spindle Size | 5/8"-11 |
Length | 16" |
Weight | 4.62 lbs. |
Air Inlet | 1/4 NPT |
Air Pressure | 90 PSI Max. |
This lightweight, rugged 1.0 Horsepower sander is excellent for shaping and contouring patches, body filler and for heavy rust removal. Comes complete with a rubber backup pad - our T-7470A.
Same great tool as the T-7716 but with a lower gear ratio. RPM is 2,500, the perfect polishing speed. Comes complete with a rubber backup pad (our T-7470A) and the T-7472 Wool Polishing Pad.
T-8816 | T-8816P | |
---|---|---|
RPM | 5,500 | 2,500 |
Spindle Size | 5/8"-11 | 5/8"-11 |
Length | 16" | 16" |
Weight | 4 5/8" | 4 5/8" |
Air Inlet | 1/4" NPT | 1/4" NPT |
Air Pressure | 90 PSI Max | 90 PSI Max |
7" Rubber Back Up Pad for the T-8816/P, T-9916P, T7716P, & T7718/P. 5/8"-11 Female Thread. 6,600 RPM Max. (Sold Separately)
7 1/2" Wood Polisher Pad for the T-8816/P, T-9916P, T7716P, & T7718/P. (Sold Separately)
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps. dBAs in the low 80's.
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps. dBAs in the low 80's. Works well in corners and on irregular shapes.
T-7060 | T-7010 | T-7012 | T-7030 | T-7020 | |
---|---|---|---|---|---|
RPM | 16,000 | 16,000 | 16,000 | 12,000 | 16,000 |
Belt Size | 1/4" x 13" | 3/8" x 13" | 1/2" x 24" | 1 3/16" x 21 1/4" | 3/4" x 20 1/2" |
Horsepower | .37 | .37 | .37 | .7 | .45 |
Length | 15 1/2" | 16 1/2" | 21 1/2" | 19 1/2" | 18 1/2" |
Weight | 1.7 lbs. | 1.7 lbs. | 1.7 lbs. | 4.9 lbs. | 3.1 lbs. |
Air Pressure | 90 PSI Max | 90 PSI Max | 90 PSI Max | 90 PSI Max | 90 PSI Max |
The top three tools have locking mechanism when arms are retracted, to aid in replacement of belts. Simply push on nose of tool until you hear the "click". Push small lever on side of arm to re-extend.
These are the "Chevy's". Great tools without the bells and whistles.
We have belts available for all of our belt sanders in grits of 60, 80, 100 and 120.
This unique sander has many uses. The roller on the back of the tool acts as a pivot point so that more or less pressure can be exerted. Side guide can be used for straight passes. Boss on right of tool for vacuum hookup.
T-7010AN | T-7012A | T-7020A | T-7040A | |
---|---|---|---|---|
RPM | 16,000 | 16,000 | 16,000 | 7,000 |
Belt Size | 3/8" x 13" | 1/2" x 24" | 3/4" x 20-1/2" | 2.36" x 10.23" |
(60 x 260 mm) | ||||
Horsepower | .37 | .37 | .45 | .37 |
Length | 11" | 17" | 14" | 7" |
Weight | 1.7 lbs. | 1.7 lbs. | 3.1 lbs. | 3 lbs. |
Air Pressure | 90 PSI Max | 90 PSI Max | 90 PSI Max | 90 PSI Max |
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA's in the low 80's.
RPM | 16,000 |
---|---|
Belt size | 3/4" X 20 1/2" |
HP | .45 |
Length | 18 1/2" |
Weight | 18 1/2" |
Air Pressure | 90 PSI Max. |
Wheels available in 16 and 24 Grit as a T-7050C16 and T-7050c24
This unique shredder has many uses. The roller on the back of the tool acts as a pivot point so that more or less pressure can be applied. Carbide wheel cuts fiberglass, concrete, wood, plastic and many more other materials.
RPM | 7,000 |
---|---|
Wheel size | 2" dia. X 2 1/4" width |
Horsepower | .37 |
Length | 7" |
Weight | 3 lbs. |
Air pressure | 90 PSI Max. |
RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad, pad nut and wrench. A great tool for buffing and polishing paint, plastic, metal and wood. Can be used with brushes to clean automotive carpets.
RPM | 2500 |
---|---|
Pad | Size 7” |
Length | 5-1/2” |
Weight | 2.6 lbs. |
Air Pressure | 90 PSI Max. |
Spindle Thrd | 3/8 - 24 |
COMES WITH ADAPTER TO CONVERT TO 5/8 - 11 MALE THREAD. ADAPTER ALSO HAS 5/16 - 24 FEMALE THREAD.
RPM | 4500 |
---|---|
Spindle | Size 5/8”-11 |
Length | 9.06” |
Weight | 4 lbs. |
Air Inlet | 1/4” NPT |
Air Pressure | 90 PSI Max. |
The T-9913WS is top of the line Air Polisher for Fabricators. Designed for continuous production use with maximum performance in Stone Shops. A very durable tool when used in adverse conditions just remember to oil the tool through the air inlet and run for a secound or two to coat all internal parts after use. Centrally fed water distribution provides quality finishes.
Comes complete with 3” velcro pad, air hose, water feed
hose with valve, splash guard side handle and wrench.