Taylor Pneumatic Sales - mdi Sales

Taylor Pneumatic Die Grinders

1/4" Straight Front Exhaust - 1/4" Straight Rear Exhaust - 1/4" Angle Front Exhaust -
1/4" Angle Rear Exhaust - 1/4" Pistol Grip - 1/4" Extended Rear Exhaust

1/4" Straight Front Exhaust Die Grinders

T-7308 1/4" Straight Front Exhaust Die Grinder


Taylor Pneumatic T-7308 1/4" Front Exhaust Die Grinders

RPM 22,000
HP .33
Length 5 5/8"
Weight 1.25 lbs
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.

A great 1/4" Die Grinder with front exhaust and lock odd lever. Powerful, lightweight, all ball bearing construction, direct drive. A long lasting quality die grinder.

T-7756 1/4" Economy Die Grinder

Taylor Pneumatic T-7756 1/4" Economy Die Grinder

RPM 20,000
Length 5 1/4"
Weight .86 lbs
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.

Compact 1/4" Die Grinder is ideal for those hard to reach applications.


T-7758 1/4" Front Exhaust Die Grinder

Taylor Pneumatic T-7757R 1/4" Front Exhaust Die Grinder

Our smallest and lightest Die Grinder, the T-7758 fits in the palm of your hand. Easy accessibility to confined areas. 1/8" collet available (-7508).

1/4" Straight Rear Exhaust Die Grinders

T-7757R 1/4" Rear Exhaust Die Grinder

Taylor Pneumatic T-7757R 1/4" Rear Exhaust Die Grinder

Compact, to work in close quarters, the T-7757R cannot be damaged by overloading. Drill, brush, hone, deburr without hazard of electric shock. (Not for use with cast wheels or accessories not rated for 25,000 RPM.) Optional 1/8" collet available (T-7508).


T-7757REN 1/4" Rear Exhaust Extended Die Grinder

Taylor Pneumatic T-7758ren 1/4" Rear Exhaust ExtendedDie Grinder

T-7757REN T-7757R
RPM 25,000 25,000
Collet Size 1/4" 1/4"
Length 13 1/4" 6 5/8"
Weight 2.6 lbs 1.37
Air Pressure 90 PSI 90 PSI
Air Inlet 1/4" NPT 1/4" NPT


The extended design allows you to reach deep into areas that would be impossible with other tools. 1/8" collet available (T-7508).

T-7758R 1/4" Rear Exhaust Die Grinder

Taylor Pneumatic T-7758R 1/4" Rear Exhauset Die Grinder

The T-7758R fits in the palm of your hand. Easy accessibility to confined areas. 1/8" collet available (T-7508).


T-7758RE 1/4" Rear Exhaust Extended Die Grinder

Taylor Pneumatic T-7758RE 1/4" Rear Exhaust Die Grinder

The extended Design allows you to reach deep into areas that would be impossible with other tools. 1/8" collet available (T-7508).


T-7758 T-7758R T-7758RE
RPM 25,000 25,000 25,000
Collet Size 1/4" 1/4" 1/4"
Length 5 1/2" 6" 10 1/4"
Weight .625 lbs. .8 lbs 1.25 lbs
Air Pressure 90 PSI Max. 90 PSI Max. 90 PSI Max.
Air Inlet 1/4" NPT 1/4" NPT 1/4" NPT

1/4" Angle Front Exhaust Die Grinders

T-7759 1/4" Right Angle Front Exhaust Die Grinder

Taylor Pneumatic T-7759 1/4" Right Angle Front Exhaust Die Grinder

Front exhaust Angle design provides comfortable grip. Strong and reliable, the T-7759 is excellent for grinding, polishing, deburring and breaking sharp edges in confined areas. 1/8" collet available (T-7508).

T-7759
RPM 25,000
Collet Size 1/4"
Length 5 1/2"
Weight .9 lbs
Air Pressure 90 PSI Max.
Air Inlet 1/4" NPT

1/4" Angle Rear Exhaust Die Grinders

T-7759R 1/4" Right Angle Rear Exhaust Die Grinder

Taylor Pneumatic T-7759R 1/4" Right Angle Rear Exhaust Die Grinder

Angle design provides comfortable grip. Strong and reliable, the T-7759R is excellent for grinding, polishing, deburring and breakup sharp edges in confined areas. 1/8" collet available (T-7508).

 

T-7759R
RPM 25,000
Collet Size 1/4"
Length 6 1/4"
Weight 1 lbs.
Air Pressure 90 PSI Max.
Air Inlet 1/4" NPT

Die Grinders Pistol Grip

T-7769R 1/4" 120°

Taylor Pneumatic T-7769R 1/4" 120°

RPM 18,000
Capacity 1/4"
Weight 1.2 lbs
Length 6 1/2"
Air Pressure 90 PSI Max.
Air Inlet 1/4" NPT


T-7779RN 1/4" Pistol Grip Die Grinder

Taylor Pneumatic T-7779RN 1/4" Pistol Grip Die Grinder

RPM 20,000
Collet Size 1/4"
HP .5
Weight 1.5 lbs
Air Pressure 90 PSI Max.


Super Duty 1/4" Extended Die Grinder

T-9957RE

Taylor Pneumatic T-9957RE

RPM 14,600
Collet Size 1/4"
Weight 3.3 lbs.
Overall Length 14.5"
Air Inlet 3/8" NPT
Air Pressure 90 PSI Max.
HP .9

The T-9957RE is a Super Heavy Duty Extended Die Grinder with magnesium/aluminum body, comfort grip handle, lock off lever and side exhaust.

1/4" Angle Die Grinder

T-9969R .9 HP Die Grinder

Taylor Pneumatic 1/4"Angle Die Grinder

Powerful, lightweight and easy to use, this grinding steel, aluminum, composites and wood. Built-in regulator for positive speed control. Hardened cylinder and end plates. Rear exhaust. 105° angle head

RPM 9,000
Collet Size 1/4"
Weight 2.2 lbs
Length 9"
Air Pressure 90 PSI Max.
Air Inlet 1/4" NPT

Die Grinder Kits

T-7758KSA Sanding Kit

Taylor Pneumatic T-7758KSA Sanding Kit

Includes T-7759 Angle Die Grinder and 10 piece grinding stones, 1/8" collet, male quick disconnect, sanding cylinder holders and sandpaper cylinders.

T-7759KSA Sanding Kit

Taylor Pneumatic T-7759KSA Sanding Kit

Includes T-7759 Angle Die Grinder and 10 piece grinding stones, 1/8" collet, male quick disconnect, 2" and 3" Pad Holders and sanding discs.

T-7759KSU Surface Prep kit

Taylor Pneumatic T-7759KSU Surface Prep kit

Includes T-7759 Angle Die Grinder and 10 piece grinding stones, 1/8" collet, male quick disconnect, 2" and 3" Pad Holders and Surface Prep Pads.

T-7759RK3 Belt sander, Die Grinder, Drill Kit

Taylor Pneumatic T-7759RK3 Belt Sander, Die Grinder, Drill Kit

3/8" X 13" Belt Sander converts to 1/4" Angle Die Grinder and 3/8" Angle Drill.

1/4" Die Grinders

The T-8857R, T-8859R and T-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories is recommended. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life of the tool.

T-8857R 1/4" Rear Exhaust Die grinder

Taylor Pneumatic T-8857R 1/4" Rear Exhaust Die grinder

T-8859R 1/4" Rear Exhaust Angle Die Grinder

Taylor Pneumatic T-8859R 1/4" Rear Exhaust Angle Die Grinder

 

T-8857R T-8859R T-8859R
Collet Size 1/4" 1/4" 1/4"
RPM 21,000 18,000 18,000
Length 6.9 7" 8"
Weight 1.2 lbs 1.7 lbs 1.7 lbs
Air Pressure 90 PSI Max. 90 PSI Max. 90 PSI Max.

Optional 1/8" collet available (T-7508)

The T-8758R and T-8759R are the .35 HP version of the T-8859R. With plenty of power and their smaller size, these tools are a must for prediction grinding.
As with all die grinders, use of balanced stones and accessories is recommended. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give you extended life to the tool.

T-8758R 1/4" Rear Exhaust Die Grinder

Taylor Pnuematic T-8758R 1/4" Rear Exhaust Die Grinder

Collet Size 1/4"
RPM 22,000
Length 6"
Weight 1 lb.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.


Optional 1/8" collet available (T-7508)

T-8759R 1/4" Rear Exhaust Angle Die Grinder

Taylor Pneumatic T-8759R 1/4" Rear Exhaust Angle Die Grinder

Collet Size 1/4"
RPM 22,000
Length 6"
Weight 1.2 lbs
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.

1/8" Collet Optional (T-7508).

Optional 1/8" collet available (T-7508)

T-8857RE Heavy Duty 1/4” Extended 20” Die Grinder

Taylor Pneumatic T-8857RE Heavy Duty 1/4” Extended 20” Die Grinder

The T-8857RE is a Heavy Duty Extended Die Grinder. 20’ length gets into the really tight spots and the .9 horsepower motor provides all the power you need. Collet provides maximun gripping strength due to both ends of the collet being slotted.

T-9958 Heavy Duty All Steel 1/4” Die Grinder

Taylor Pneumatic T-9958 Heavy Duty All Steel 1/4” Die Grinder

The T-9958 is an all steel bodied 1/4” Precision Die Grinder. It has a side exhaust and easy to use safety lever. Built for the roughest use. Collet is one piece.

T-9901RN Heavy Duty Low Speed 1/4” Die Grinder

Taylor Pneumatic T-9901RN Heavy Duty Low Speed 1/4” Die Grinder

The T-9901RN features a low 3,800 RPM, easy to use safety lock off lever, sure grip rubber handle cover and plenty of power.

T-8957R 1/4” Reversible Die Grinder

Taylor Pneumatic T-8957R 1/4” Reversible Die Grinder

T-8857RE T-9958 T-9901RN T-8957R
RPM 22,000 24,000 3,800 18,000
Collet Size 1/4” 1/4” 1/4” 1/4”
Weight 3.8 lbs. 1.8 lbs. 2.lbs. 1.6 lbs.
Overall Length 25.25” 7-1/4” 8’ 7-1/2”
Air Inlet 1/4”NPT 1/4”NPT 1/4”NPT 1/4”NPT
Air Pressure 90 PSI Max. 90 PSI Max 90 PSI Max 90 PSI Max
HP .9 .4 .9 .9

1/4" Die Grinders - Super Duty

T-9758 1/4" Super Duty Die Grinder .3HP (front exhaust)

Taylor Pneumatic T-9758 1/4" Super Duty Die Grinder .3HP (front exhaust)


T-9758R 1/4" Super Duty Die Grinder .3HP (rear exhaust)


Taylor Pneumatic T-9901R 1/4" Low Speed Die Grinder .9 HP


Optional 1/8" collet available (T-7508)

T-9757 1/4" Super Duty Die Grinder .6 HP (front exhaust)

Taylor Pneumatic T-9757R 1/4" Super duty Die Grinder .6 HP (Rear Exhaust)

 

T-9757R 1/4" Super Duty Die Grinder .6 HP (rear exhaust)

Taylor Pneumatic T-9757R 1/4" Super Duty Die Grinder .6 HP (Rear Exhaust)


Optional 1/8" collet available (T-7508)

T-9755 1/4" Super Duty Die Grinder .9 HP (front exhaust)

Taylor Pneumatic T-9755 1/4" Super Duty Die Grinder .9 HP (Front Exhaust)

T-9755R 1/4" Super Duty Die Grinder .9 HP (rear exhaust)

Taylor Pneumatic T-9755R 1/4" Super Duty Die Grinder .9 HP (Rear Exhaust)


Our most powerful high speed Die Grinder.

Optional 1/8" collet available (T-7508)

T-9759R 1/4" Super Duty Die Grinder .3 HP (front exhaust)

T-9759 1/4" Super Duty Die Grinder .3 HP (rear exhaust)

Taylor Pneumatic T-9759 1/4" Super Duty Die Grinder .3 HP (Rear Exhaust)

Optional 1/8" collet available (T-7508)

T-9901R 1/4" Low Speed Die Grinder .9 HP

Taylor Pneumatic T-9901R 1/4" Low Speed Die Grinder .9 HP

T-9755/ R T-9757/ R T-9758/ R T-9759/ R T-9901R
RPM 18,000 20,000 25,000 25,000 3,800
Collet Size 1/4” 1/4” 1/4” 1/4” 1/4"
Length Front 6-3/4” 6-1/4” 5-1/4” 5-1/2” 9"
Rear 7-1/4” 7” 6” 6-1/4” 9"
Weight 1.5 lb. 1.32 lb. .8 lb. .9 lb. 2.2 lbs
Air Pressure 90 PSI Max. 90 90 90 90
Air Inlet 1/4” NPT 1/4” 1/4” 1/4” 1/4"

Optional 1/8" collet available (T-7508)

If you need torque in a die grinder, the T-9901R is for you. The .9 HP motor is strong and compact. Aluminum handle is comfortable and easy to grip.


Front Exhaust ? - Rear Exhaust ? Now you can choose. If your work needs to be blown off for better visibility use the front exhaust. If you are working in a confined area and the exhaust and grindings may blow back at you, use the rear exhaust tools. R = REAR EXHAUST

Our Sales Team is standing by to help you with your order or questions about the Taylor Pneumatic Tool Product Line. Give mdi a Call Today!

We are available via phone Monday - Friday, 8 AM to 7 PM (EST), including most holidays. You can send an Email or Request A Quote anytime!

Taylor Pneumatic Tools Product Navigation Panel

Chipping, Rivet, & Palm Grip Air Hammer Tools

Impact Gun / Wrench Tools

Belt, Straight & DA Sander Tools

Grinder Tools

Cutoff, Cutter, Filer, Nibbler, & Saw Tools

Punch / Flange, Nailer, Riveter Tools

Polisher / Buffer, Caulk & Grease Gun Tools

Scaler & Scraper Tools

Shear & Scribe Tools