Taylor Pneumatic Drill Attachments
T-DA90 3/8"

Drill Attachment turns a straight drill into an angle drill
- 3/8" Jacobs Chuck
- Requires only 4" Clearance
- One to one gear ratio
- Not for use with bits larger that 3/8"
T-SP90

Drill Attachment turns a straight drill into an angle drill
- 1/2" Jacobs Chuck
- Requires only 5 1/2" Clearance
- One to one gear ratio
- Not for use with bits larger that 1/2"
T-7007N Spray gun & No Drip Cup

Cup Capacity |
1 Qt. |
Nozzle Tip |
1.8mm |
Fluid Inlet |
3/8" NPT |
Weight Gun & Cup |
1.2 lbs. |
Air Pressure |
30 to 70 PSI |
Air Consumption |
8.5 to 12 CFM |
Compressor Required |
1 1/2 HP Min. |
T-7015N Touch up Jam Gun & cup

Cup Capacity |
8 fl. oz. |
Air Pressure |
40 to 90 PSI Max. |
Air Consumption |
2 to 4 CFM |
Nozzle Tip |
1.8 mm |