Needle Diameter | 3 mm |
---|---|
# of needles | 19 |
Bore & Stroke | 1" X 1 1/8" |
Blows per Min. | 4,500 |
Length | 15" |
Weight | 6 lbs. |
Air Pressure | 90 PSI Max. |
The T-7356 has many applications. Chipping concrete and brick, cleaning castings and paint, and rust removal. Remove the needle scaler attachment T-7356AT and add the T-7356A8 chisel to use this tool for scaling. (order chisels separately)
Needle Diameter | 3mm |
---|---|
# of needles | 19 |
Bore & Stroke | 1”X 1-1/8” |
Blows per min. | 4500 |
Length | 15” |
Weight | 6 lbs. |
Air Pressure | 90 PSI Max. |
The T-7356 has many applications. Chipping concrete and brick, cleaning casting and paint, and rust removal. Remove the needle scaler attachment T-7356AT and add the T-7356A8 chisel to use this tool for scaling. (order chisels separately)
Bore & Stroke | 1" X 1 1/8" |
---|---|
Blows per Min. | 4,500 |
Length | 10 1/4" |
Weight | 3 3/4" |
Air Pressure | 90 PSI Max. |
Air Inlet | 6 lbs. |
The Ideal tool for weld flux removal and light chipping operations where lightweight and reliability are needed, such as, foundries and fabrication shops. Same body as the T-7356, just remove the T-7356A8 chisel and add the T-7356AT to turn the T-7356A into T-7356.
Blows per Min. | 3,000 |
---|---|
# of Needles | 19 |
Needle Diameter | 3 mm |
Weight | 5.7 lbs. |
Length | 10" |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
Both tools have the adjustable vacuum shroud brush attachment. The shroud is effective at trapping and removing coatings, corrosion and other debris dislodged by the needle scaler. These scalers work on almost any surface including irregular shapes such as tubing, rivet heads, steel window sills, weld seams, corner, edges, bearing mounts, concrete and many others.
Blows per min. | 3,000 |
---|---|
# of Needles | 19 |
Needle Diameter | 3mm |
Length | 10” |
Weight | 5.7 lbs. |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8” ID |
Blows per min. | 3,000 |
---|---|
Length | 8 1/5" |
Weight | 5.7 lbs" |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
Blows per min. | 2,200 |
---|---|
# of needles | 35 |
Needle Diameter | 4 mm |
Length | 20" |
Weight | 13 lbs. |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
T-7182 | T-7182A | |
---|---|---|
Strokes per min. | 4,000 | 4,000 |
Stroke | 7/8" | 7/8" |
# of needles | 19 | N/A |
Needle diameter | 3 mm | N/A |
Length | 16 3/8" | 8 1/2" |
Weight | 6 lbs. | 3.8 lbs |
Air Pressure | 90 PSI Max. | 90 PSI Max. |
Air Inlet | 1/4" NPT | 1/4" NPT |
The T-7182 can be changed into a weld flux scaler by simple removing the scaler tube and mushroom chisel and inserting a scraper blade or punch. Changing chisels is easy, a twist of the chisel retainer releases the steel ball holding the chisel and chisels may then slide in or out. Uses IR style chisels. T-7182 is Needle Scaler. T-7182A is Weld Flux Scaler (comes with 1 1/4" angle scraper T-7601AH9)
The T-7356K includes the T-7356, T-7356A8 1 1/4" Angle Chisel, T-7356A1 Diamond Point Chisel, T-7356A4 1/2" Cold Chisel, extra set of 7" Needles )not shown) and molded carrying case. A great way to keep your tools together.
TAYLOR PNEUMATIC OFFERS A FULL LINE OF AIR HAMMERS, SANDERS, DRILLS, IMPACTS, NEEDLE SCALERS, RATCHETS, SCREWDRIVERS, DIE GRINDERS, RIVETERS, POLISHERS, AND SPECIALTY TOOLS. SOLD ONLY THROUGH DISTRIBUTORS
T-8601 | T-8602 | |
---|---|---|
Needle Diameter | 3 mm | 3 mm |
# of needles | 19 | 19 |
Blows per min. | 1,800 | 2,400 |
Length | 18 1/2" | 17 1/5" |
Weight | 8.15 lbs. | 7.26 lbs |
Air Pressure | 90 PSI Max. | 90 PSI Max. |
The T-8601 and T-8602 have many applications. Chipping concrete and brick, cleaning castings and paint and rust removal.
Vibration dampening features lessons operator fatigue. Comfortable rubber grip. Needles adjust to contours. Precision machined and hardened parts. Needle scaler attachment can be removed to accommodate .401 shank chisels
Needle Diameter | 3 mm |
---|---|
# of needles | 12 |
Piston Stroke | 1" |
Strokes per min. | 4,200 |
Length | 12 5/16" |
Weight | 2.5 lbs. |
Air Pressure | 90 PSI Max. |
The T-6356 is compact and easy to use. Solid steel construction, hardened and ground parts and precision machining makes it hard hitting and perfect for tight spots. Uses same needles as our popular T-7356.
These needles fit Taylor Pneumatic':
Needle scalers and many similar types.
Box of 1,000 needles is the least expensive way to purchase. Quantity works out to be slightly over 52 sets of 19 needles. Needles come packed in 10 bags of 100. Weight is 23 lbs. T-735646B.
The T-7603K comes with three extension bars - 2 at 19 1/2" and one 12". The three examples on the right show some of the many combinations in which this tool can be used - 24" to 83". If you already own a T-7603, you can turn it into a NEEDLE SCALER by adding the T-7603AT needle scaler attachment.
Blows per min | 2,200 |
---|---|
Piston Stroke | 1 1/2" |
Length | 24" - 83" |
Weight | 13.5 lbs. |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
Blows per min. | 2,200 |
---|---|
Piston Stroke | 1 1/2" |
Width of Scraper | 4" |
Length | 72" |
Weight | 13.5 lbs |
Air Pressure | 90 PSI Max. |
Hose Size | 3/8" ID |
The T-7603 and T-7603NS come with the two extension bars seen above. The example on the right show the three lengths that each tool can be assembled to. The lengths are from left to right 71" over all length, 47" O.A.L. If you already own a T-7603, you can turn it into a needle scaler by adding the T-7603AT needle scaler attachment.
Bore & Stroke | 1.1" X 1" |
---|---|
Blows per min. | 3,000 |
Pistons | Three 4 point carbide tipped |
Length | 21" |
Weight | 9 lbs. |
Air Pressure | 90 PSI Max. |
The T-7605 Single Piston Hammer/Scaler is used to produce a hard hitting vibratory action to remove concrete, old paint, rust and scale in fabrication shops, construction applications, shipyards and for maintenance. Use 1/2” hose
Piston Bore | 30 x 24 x 75 MM |
---|---|
Piston | 30 x 24 x 80 MM |
Length | 480 MM |
Weight | 4.18 lbs. |
Air Inlet | 3/8” NPT |
Taylor Pneumatic Air Tool Oil is specifically blended to remove harmful deposits that can build up in your tool. It also emulsifies with moisture to protect internal steel parts and bearings. NOTE: The most effective time to oil a tool is right after use. Put a teaspoon or two in the air inlet, run the tool for a second or two to coat all internal parts.