The T-7891N and T-7892N are air over hydraulic riveters. The large canister on the bottom contains an air piston, that when activated by the trigger, pusher the piston into a reservoir or oil that in turn pushes another piston compounding the force that pulls the rivet.
The grip of both tools is adjustable. They can be adjust to hold the rivet mandrel tightly so that is will not fall out before insertion, or it can be adjusted to fit loosely in the jaws. Both tools include see through mandrel catchers and a hanger eye on top of the tool.
Capacity | 3/16" |
---|---|
Pulling force | 2,300 lbs. |
Stroke | Adjustable to 9/16" |
Height | 10 1/4" |
Weight | 3.12 |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
Tool includes 3/16", 5/32",1/8" and 3/32" nosepieces.
Hi Volume Rivet mandrel Catcher Optional - 789122HV for 3/16" models only
Capacity | 1/4" |
---|---|
Pulling Force | 3,500 |
Stroke | Adjustable to 11-16" |
Height | 11 3/4" |
Weight | 3.75 lbs. |
Nose Length | 3 3/4" |
Air Pressure | 90 PSI Max. |
Tool includes 1/4", 7/32", 3/16", 5/32", 1/8", 3/32" nosepieces. Not for 1/4" monobolts. Will pull smaller size monobolts
Can be ordered in a convenient carrying case as T-7891NK or T-7892NK
The T-7893N is designed to pull 1/4" monobolts
Capacity | 1/4" |
---|---|
Pulling Force | 3,850 |
Stroke adjustable to | 11/16" |
Height | 11 3/4" |
Weight | 4.5 lbs. |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. | Nose Length | 3 3/4" |
Tool includes 1/4" and 3/16" nosepieces. Extra long air cylinder creates more pulling force
Capacity | 3/16" |
---|---|
Pulling force | 2,300 lbs. |
Stroke | Adjustable to 9/16" |
Height | 10 1/4" |
Weight | 3.12 |
Air Inlet | 1/4" NPT |
Air Pressure | 90 PSI Max. |
These tool has an extended nose for those hard to reach fasteners. Pulls 1/8", 5/32", 3/32" and 3/16 rivets. (no monobolts)
Capacity | 1/4" |
---|---|
Pulling Force | 3,500 lbs |
Stroke | adjustable to 11/16" |
Height | 11 1/2" |
Weight | 4.25 lbs |
Nose Length | 8 1/4" |
Air Pressure | 90 PSI Max. |
Tool includes 1/4", 7/32", 3/16", 5/32", 1/8" and 3/32" nosepieces. Not for 1/4" monobolts. Will pull smaller sizes.
Capacity | 1/4" |
---|---|
Stroke | 23/32" |
Weight | 3.7 lbs. |
Length | 21" |
Used to squeeze a wide range of sizes and types of rivets. The T-3000C, T-3000A, T-6000C and T-6000A’s are commonly used for pressing, stamping and staking in manufacturing industries ranging from electronic components, boats, aircraft, automotive assemblies, trucks and buses. Compression force is multiplied by the unique cam and wedge design. Throttle control allows ease of use. Operation of the tool is quiet yet gives great accuracy and productivity. T-6000 series tools give twice the force of the T-3000 tools.
Model | T-3000C | T-6000C15 | T-3000A3 | T-6000A3 | |
---|---|---|---|---|---|
T-3000A | T-6000A15 | T-3000C3 | T-6000C3 | ||
T-3000C15 | |||||
T-3000L | |||||
Rivet Capacity | Alum | 1/8" | 3/16" | 3/32" | 1/16" |
Steel | 3/32" | 5/32" | 1/16" | 5/32" | |
Compression Force: | lbs. | 3,000 | 6,000 | 1,800 | 4,100 |
Overall Length: | in. | 10 1/4 | 14 | 10 3/4 | 13 1/2 |
Weight: | lbs. | 4.5 | 5.5 | 4.5 | 6 |