Note: T-1X and T-1XS use special "JIFFY" style .401 shank rivet sets for riveting capabilities in extremely tight areas.
Model | Shank Diameter | Bore & Stroke | Blows per Min. | Length | Weight | Air Pressure | Aluminum Rivet Capacity |
---|---|---|---|---|---|---|---|
T-1X/T-1XS | .401 | 9/16" X 1 7/8" | 2,850 | 4" | 2 1/8 lbs. | 90 PSI Max. | 1/8" |
T-2X/T-2XS | .401 | 1/2" X 2 1/4" | 2,600 | 6 11/16" | 2 1/4 lbs. | 90 PSI Max. | 1/8" |
T-3X/T-3XS | .401 | 1/2" X 2 7/8" | 2,100 | 7 5/16" | 2 5/16 lbs. | 90 PSI Max. | 3/16" |
T-4X/T-4XS | .401 | 1/2" X 3 1/16" | 1,700 | 8 5/16" | 2 3/4 lbs. | 90 PSI Max. | 1/4" |
Model | Shank Diameter | Bore & Stroke | Blows per Min. | Length | Weight | Air Pressure | Aluminum Rivet Capacity |
---|---|---|---|---|---|---|---|
T-5X | .498 | 3/4" X 2 11/16 | 1,800 | 8 15/16" | 4.75 lbs. | 90 PSI Max. | 1/4" |
T-7X | .498 | 3/4" X 5 13/16" | 900 | 11 15/16" | 6 lbs. | 90 PSI Max. | 3/8" |
T-9X | .498 | 3/4" X 3 7/8" | 1,150 | 9 15/16" | 5.37 lbs | 90 PSI Max. | 5/16" |
These tools are extremely powerful for heavy duty riveting. They also perform well for front end work, removal of heavy duty spring bushing and pins and any type of trucks or off road equipment requiring driving, hammering, ripping, scraping or punching.
Model | T-7151 | T-7111 |
---|---|---|
Shank Diameter | .401 | .401 |
Bore & Stroke | 3/4" X 3 1/2" | 3/4" X 2 1/2" |
Blows per Min. | 2,100 | 3,500 |
Length | 8 7/8" | 6 3/4" |
Weight | 4.5 lbs | 3.5 |
Air Pressure | 90 PSI Max. | 90 PSI Max. |
Aluminum Rivet Capacity | 1/4" NPT | 1/4" NPT |
Now available: Needle Scaler attachment for the T-7111 & T-7151.
Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The T-7151 has a longer stroke and heavier piston. The T-7151 has a longer stroke and heavier piston. The T-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.
These chisels fit the T-2X, T-3X, T-4X Rivet Hammers, the T-7111 and T-7151 Air Hammers, as well as any hammer that accepts .401 shank chisels. Forged steel.
The T-7121 is a Super Duty Air Hammer that produces up to 3,000 blows per minuet at 90 PSI. Excellent for cutting, crimping, drive pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.
Uses quick change spring T-712117 (included with tool)
Shank Diameter | .401 |
---|---|
Bore & Stroke | 3/4" X 2 9/32" |
Blows per minuet | 3,000 |
Length | 7.63" |
Weight | 3.5 lbs |
Air Pressure | 90 PSI Max. |
Air Inlet | 1/4" NPT |
Blows per minuet | 800 |
---|---|
Piston Stroke | 5" |
Butt Diameter | 3" |
Length | 49" |
Weight | 21.5 lbs |
Air Pressure | 90 PSI Max. |
Hose Size | 1/2" ID |
The T-5T Sander Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used.
Or T-#24BH (hex shank chisels)
Or T-#34BH (Hex shank chisels)
Or T-#44BH (hex shank chisels)
Model | T-#24B | T-#24BH | T-#34B | T-#34BH | T-#44B | T-#44BH |
---|---|---|---|---|---|---|
Bore & Stroke | 1 1/8" X 2" | 1 1/8" X 2" | 1 1/8" X 2" | 1 1/8" X 2" | 1 1/8" X 2" | 1 1/8" X 2" |
Blows per Min. | 2,400 | 2,400 | 1,920 | 1,920 | 1,500 | 1,500 |
Shank Diameter | .680 rd | .580 hex | .680 rd | .580 rd | .680 rd | .580 hex |
Length | 14.4" | 14.4" | 15.75" | 15.75" | 16.7" | 16.7" |
Weight | 17.5 lbs | 17.5 lbs | 18.5 lbs | 18.5 lbs | 19.8 lbs | 19.8 lbs |
The T-#2, T-#3, T-#4 Chipping hammers are designed foe heavy duty use. Solid steel construction and hard hitting tool steel pistons give years of service. Use 90 PSI. to get maximum life. Higher pressure shortens tool life.
Model | T-#2 | T-#3 | T-#4 |
---|---|---|---|
Bore & Stroke | 1 1/8" X 2" | 1 1/8" X 3" | 1 1/8" X 4" |
Blows per Min. | 2,150 | 1,900 | 1,500 |
Shank Diameter | .680 | .680 | .680 |
Length | 15 1/2" | 16 1/4" | 18 1/4" |
Weight | 14.5 lbs | 15.62 lbs | 18.87 lbs |
Air Pressure | 90 PSI Max. | 90 PSI Max. | 90 PSI Max. |
All three Chipping Hammers take round shank oval collar chisels and come complete with the #23431N3 chisel retainer.
Chipping Hammer Accessories These accessories fit our T-#2, T-#24B, & T-#3, T-#44B Chipping Hammer as well as any chipping hammer that accepts .680 round shank oval collar chisels or .580 hex shank chisels like the T-#24BH, T-#34BH and T-#44BH Four Bolt Chipping Hammers.
T-#23450 Hose Swivel 7/8-24 Fits our T-#2, 3, 4 Chipping Hammers. Remove air inlet - add swivel.
These Chisels fit out T-#24BH, T-#34BH and T-#44BH. Made of forged steel
.580 Hex Shank Oval Collar Chisels
T-#23451 Hose Swivel 3/8" NPT Fits all Chipping Hammers Screws into the air inlet.
T-#23450 Hose Swivel 7/8-24 Fits our T-#2,3,4 Chipping Hammers. Remove air inlet - add swivel.
Chipping Hammer RETAINERS
for .580 and .680 chisels
T-7516 Quick Change Ball Type Retainer (optional) fits all Chipping Hammers
RETAINER SPRING
Fits both retainers above