Taylor Pneumatic Sales - mdi Sales

Screwdrivers

T-2420EX

Taylor Pneumatic T-2420EX

Push to Start, Auto Start & Auto Shut off Screwdrivers


RPM 800
Hex Drive 3.5 mm
Clutch Type Internally adjustable
Torque Range 3.11 to 10.67 in. lbs.
Length 7 1/2"
Weight .8 lbs.

T-2430EX

Taylor Pneumatic T-2430EX

Push to start. Auto start & Auto Shut off Screwdriver


RPM 1,000
Hex Drive 1/4"
Clutch Type Internally adjustable
Torque Range 10.67 to 19.56 in. lbs.
Length 10 1/4"
Weight 1.6 lbs.

Manual torque adjustment - tighten or loosen internal spring

T-2440EX

Taylor Pneumatic T-2440EX

Push to start. Auto start & Auto Shut off Screwdriver

RPM 600
Hex Drive 1/4"
Clutch Type Internally adjustable
Torque Range 17.78 to 42.67 in. lbs.
Length 11.25
Weight 2.25


T-7761 1/4" Straight Handle Screwdriver

Taylor Pneumatic T-7761 1/4" Straight Handle Screwdriver

RPM 1,600
Hex Drive 1/4" Female
Max. Torque Soft Pull 30 in. lbs.
Max. Torque Hard Slam 70 in. lbs.
Length 8 7/8"
Weight 1.25 lbs.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.


T-7761AH 1/4" Right Angle Screwdriver

Taylor Pneumatic T-7761AH 1/4" Right Angle Screwdriver

RPM 1,500
Hex Drive 1/4" Female
Max. Torque Soft Pull 30 in. lbs.
Max. Torque Hard Slam 70 in. lbs.
Length 10"
Weight 1.8 lbs.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.


T-7744S, 1/4"

Taylor Pneumatic T-7744S 1/4"

Free Speed RPM 9,000
Max. Torque 160 ft. lbs.
Weight 3 lbs.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.

Impacting clutch provides plenty of torque.

Convenient forward and reverse button is located just above the trigger.

Quick change bit holder-pull back to release bits.

T-7763 1/4" Screwdriver

Taylor Pneumatic T-7763 1/4" Screwdriver

RPM 1,800
Hex Drive 1/4"
Torque 45-115 in. lbs.
Length 7"
Weight 2.5 lbs.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.


This pistol grip screwdriver is light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing direction easy.

T-7766 Positive Clutch Screwdriver

Taylor Pneumatic T-7766 Positive Clutch Screwdriver

RPM 1,800
Torque 115 in. lbs.
Hex Drive 1/4"
HP .5
Weight 2.25 lbs.
Air Pressure 90 PSI


This pistol grip screwdriver is light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

T-7766HR Positive Clutch Externally Adjustable 1/4"

Taylor Pneumatic T-7766HR Positive Clutch Externally Adjustable 1/4"

RPM 800
Torque 45 to 115 in. lbs.
Hex Drive 1/4"
HP .5
Weight 3 lbs.


T-7763S 1/4" Straight Handle Screwdriver

Taylor Pneumatic T-7763S 1/4" Straight Handle Screwdriver

RPM 800
Hex Drive 1/4"
Torque 45 to 115 in. lbs.
Length 11"
Weight 3 2/3 lbs.
Air Inlet 1/4" NPT
Air Pressure 90 PSI Max.

Lightweight and ease to use. The T-7763S is strong and powerful. Bail Hanger, rear exhaust, reversible, internally adjustable.

The torque on the T-7763, T-7763EX, T-7763S and T-7764EX can be further changed by switching the springs in the clutch.

776337A, 20-90 in. lbs.
776337B 45-115 in. lbs.
776337C 45-145 in. lbs.

T-7763EX 1/4" Externally Adjustable Clutch Screwdriver

Taylor Pneumatic T-7763EX 1/4" Externally Adjustable Clutch Screwdriver


RPM 1,800
Hex Drive 1/4"
Torque 45 to 145 in. lbs.
Weight 3 lbs.
HP .5

This pistol grip screwdriver is light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

T-7764EX 1/4" Externally Adjustable Clutch Screw Driver

Taylor Pneumatic T-7764EX 1/4" Externally Adjustable Clutch Screw Driver

RPM 800
Hex Drive 1/4"
Torque 45 to 115 in. lbs.
Weight 3.5 lbs.
HP .5


This pistol grip screwdriver is light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing direction easy.

The torque on the T-7763, T-7763EX, T-7763S and T-7764EX can be further changed by switching the springs in the clutch.

776337A, 20-90 in. lbs.
776337B, 45-115 in. lbs.
776337C, 45-145 in. lbs.

Straight Screwdriver

T-8863S

Taylor Pneumatic T-8863S


RPM 8,500
Max. Torque 175 in. lbs.
Bit Holder 1/4"
Length 8.27"
Weight 2.51 lbs.
Air Pressure 90 PSI Max.
Air Inlet 1/4" NPT

Our Sales Team is standing by to help you with your order or questions about the Taylor Pneumatic Tool Product Line. Give mdi a Call Today!

We are available via phone Monday - Friday, 8 AM to 6 PM (EST), including most holidays. You can send an Email or Request A Quote anytime!

Taylor Pneumatic Tools Product Navigation Panel

Chipping, Rivet, & Palm Grip Air Hammer Tools

Impact Gun / Wrench Tools

Belt, Straight & DA Sander Tools

Grinder Tools

Cutoff, Cutter, Filer, Nibbler, & Saw Tools

Punch / Flange, Nailer, Riveter Tools

Polisher / Buffer, Caulk & Grease Gun Tools

Scaler & Scraper Tools

Shear & Scribe Tools